heating films

: High efficiency heat radiation heating type to minimize the fuel costs.

: The infrared rays are used for heating. No discrepancy in the upper/lower area temperature.
  Compared to general convection methods, less power consumption can be used to create
  an excellent heating effect.

: Partial heating is supported. If there is no guest then heating is minimized to lower the total cost.

: No repair or maintenance costs. (Semi permanent heating system)

: High efficiency and speed heating is achieved.
  The carbon heating object on the film surface generate very warm infrared radiation heats
  and a large amount of anions to create an excellent heating effect.
  (The infrared radiated heat does not have a temperature difference in the upper/lower area.
  Compared to a flow type, it can give you a more refreshing heating effect at relatively low room temperature.)

: No new house symptom or EMI that are harmful to humans.

: Simply insert it between the floor finishing material and the insulation material. Very simple construction works!

: Do not remove the existing floor but instead place the film on top of it.
  Create the best effect at a minimum cost.

: No flame is used for ignition.
  (No flame is used indoors, so there is no danger of CO2 or conduction caused accidents.
  It is safe for children or elders to use. )

: Double, triple safety device and adequate temperature heating

: Convenient fuel injection, no worries for freezing in the winter.

: No combustion or operational sounds or no vibrations.
  Also, no dusts generated from air ventilation. You can maintain a quiet and clean heating environment. 
  It is the best product for a hospital or nursing facility that requires cleanness.

: Simple structure and high durability. Semi permanent use for a facility with excessive impacts such as a gym.

: No worries for freezing, No periodic post management is required. Easy to move installation.